BKMQF - YTTRIUM BARIUM COPPER OXIDE, ANNEALED, 99.9
- MSDS: BKMQF
- Manufacturer: ALDRICH CHEMICAL CO INC SUB OF SIGMA ALDRICH CORP
- Product Name: YTTRIUM BARIUM COPPER OXIDE, ANNEALED, 99.9
- National Stock Number: 6850-00N014943
Product Identification
Product ID:YTTRIUM BARIUM COPPER OXIDE, ANNEALED, 99.9
MSDS Date:05/23/1990
FSC:6850
NIIN:00N014943
MSDS Number: BKMQF
Responsible Party
MILWAUKEE, WI 53201
US
Emergency Phone: 414-273-3850
Info Phone: 414-273-3850/FAX -4979
Cage: 60928
Contractor
Telephone: 414-273-3850
Cage: 60928
Ingredients
YTTRIUM BARIUM COPPER OXIDE, ANNEALED, 99.9%
Fraction By Weight: 99.9%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:MAY BE HARMFUL BY INHALATION,
INGESTION OR SKIN ABSORPTION. CAUSES EYE AND SKIN IRRITATION.
MATERIAL IS IRRITATING TO MUCOUS MEMBRANES AND UPPER RESPIRATORY
TRACT.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:IMMED FLUSH W/COPIOUS AMTS OF WATER FOR AT LEAST 15
MINUTES. SKIN:IMMED WASH W/SOAP & COPIOUS AMTS OF WATER. WASH
CONTAMD CLTHG BEFORE REUSE. INHAL:REMOVE TO FRESH AIR. IF NOT BRTHG
GIVE ARTF RES P. IF BRTHG DFCLT, GIVE O*2. CALL MD. INGEST:CALL MD
IMMEDIATELY .
Fire Fighting
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL POWDER,
ALCOHOL OR POLYMER FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . PREVENT CONTACT WITH SKIN AND EYES.
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.
Accidental Release
Spill Release Procedures:WEAR NIOSH/MSHA APPROVED RESPIRATOR, CHEMICAL
SAFETY GOGGLES, RUBBER BOOTS & HEAVY RUBBER GLOVES. SWEEP UP, PLACE
IN BAG & HOLD FOR WASTE DISPOSAL. AVOID RAISING DUST. VENTILATE
AREA & WASH SPILL SITE AFTER MATERIAL PICKUP COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY PLACE UNDER
NITROGEN. PROTECT FROM MOISTURE AND AIR. KEEP TIGHTLY CLOSED. DO
NOT BREATHE DUST. AVOID CNTCT W/EYES, SKIN & CLTHG.
Other Precautions:IRRITANT. HARMFUL SOLID.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:MECHANICAL EXHAUST REQUIRED.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SAFETY SHOWER AND EYE BATH.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Appearance and Odor:BLACK POWDER.
Stability
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:SENSITIVE TO MOISTURE AND AIR.
Hazardous Decomposition Products:NATURE OF DECOMPOSITION PRODUCTS NOT
KNOWN.
Disposal
Waste Disposal Methods:BURY IN LANDFILL SITE APPROVED FOR DISPOSAL OF
CHEMICAL AND HAZARDOUS WASTES. OBSERVE ALL FEDERAL, STATE AND LOCAL
LAWS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.